Congratulations to yongchen, shunde, guangdong for energy conservation and environmental protection in 2015 primary and middle school water dispenser equipment procurement project in shouguang, shandong province

Shouguang city 2015 primary and secondary school safe drinking water project water dispenser equipment procurement project (package 2)
The serial number       Name and model of equipment         brand           The number of         unit

     1           4. Tap business water dispenser        Yongcen              9              tai

     2           6. Tap business water dispenser        Yongcen             106              tai

In this bidding project, our company's business team and local dealers have been working hard for two weeks, no matter from communication to plan setting, the design of bidding document and preparation of various materials, we have been very serious and rigorous in every detail. It can be said that the winning bid depends on the efforts of every yongchen and the unity of dealers.      

The winning model is as follows:【YC-4G】

【YC-6G】

● Features of product:

1. The filtering system of four faucet and one faucet at three temperature (six faucet and one faucet at five temperature) is of five levels.
2. Water dispenser filtration system adopts PP cotton + resin filter + granular activated carbon + secondary PP cotton +RO reverse osmosis host filter + post-placed activated carbon and high-temperature sterilization and ultraviolet sterilization treatment. At the same time, the design of mineral supplement or filtration technology is better. RO reverse osmosis group with 400 gallons and 4 taps can reach 200 students per set.
3. The water dispenser has the functions of intelligent water control, leakage protection and water instruction without opening or leaving; With water valve lock, switch machine time control; Integrated temperature display and control functions.
4, water machine can provide hot water and warm water at the same time, water temperature to 100 ℃, the water quality after the warm water to cool the boiled water, the temperature at 35 ℃ ~ 45 ℃, water quality inspection by the health department. Anti-overtemperature protection, can automatically cut off the power supply in case of overtemperature to ensure the temperature does not exceed the set range. Warm water is all boiled water through the heat exchanger to cool down.
5. The water purification equipment of the water dispenser and the integrated design of the drinking water platform, the cabinet type floor installation, the length and width can be adjusted, the height of the mesa is 80cm, the height of the back is 120CM (without feet), the warm water faucet is 20CM away from the mesa, and the hot water nozzle is 42 CM away from the mesa. 4 stainless steel faucet, change 2 to separate water.
6. The panel and the water tank are made of food-grade 304 stainless steel plate with thickness of more than 1.2mm. The panel is moulded as a whole and designed for splash resistance. The side plate is made of 304 stainless steel, and the thickness is greater than 0.9mm. The back plate is made of 201 stainless steel with thickness greater than or equal to 0.7mm. The base plate is made of 201 stainless steel and the thickness is greater than or equal to 0.7mm. The frame is made of stainless steel square pipe with a thickness of more than 0.8mm.
7. This sample is designed with a water tank and a pressure tank (11G). The pressure tank has a larger water yield than the double water tank to ensure the use of water for students. The water gallbladder is made of food-grade 304 stainless steel plate, with thick insulation layer and wall thickness of 1.2mm or more. The water supply pipe in the drinking fountain shall be made of food-grade 304 stainless steel corrugated pipe. The drainage hose connected with the water inlet under the funnel shall be high-temperature resistant hose, the drainage hose shall be lined with steel wire, and the hose shall be locked with threaded plastic joint to ensure that the drainage system does not leak and is not vulnerable to damage. Pipe water tank complete sealing device. Pressure tank adopts closed water circulation to avoid secondary pollution. Safe and non-toxic! Isolation from the air will not produce secondary pollution, the internal environmental protection coating does not produce water-soluble substances! Using food grade plastic, surface coated with light film. To carry out the test of 50 thousand times of durability filling and discharging life.
8. In the water dispenser, the heating pipe of heating pipe is nickel coated, the copper pipe wall is thickened copper pipe, and the surface coating of heating pipe is specially heat-resistant coating. The service life of heating pipe is not less than 5 years. The temperature of warm water is controllable, and the outlet temperature is between 35 and 45 degrees.
9. Power supply is 220V and 50HZ. Suitable for water pressure of 0.1~ 0.6mpa, with timing switch function. Class II, equipment leakage protection, leakage protection, dry burning. Atmospheric design, heating without pressure. Digital display temperature, with intelligent water control system, water does not open without water, no repeated heating.
10. Requirements for grounding body: production and installation in accordance with national standards; The measured resistance is less than 10 ohms.
11. Anti-freezing measures are available.
12. The water quality requires that the water outlet of the water dispenser should effectively remove particulate matter, residual chlorine, heterogeneous odor, bacteria and microorganisms, and have a better taste.